Licensed providers for professional drivers and small fleets, from official registersSources: 110 official government lists
DriverComplydirectory
CountryUnited States
United StatesCanadasoonUnited KingdomsoonAustraliasoon
HazMat Training1,629Vehicle Inspection67,637CDL & ELDT Training4,122CDL Testing & DMV3,997TSA HazMat & TWIC Enrollment619BOC-3 Process Agents3,738Truck Parking1,915Truck Stops2,835ELD DevicesDOT Physicalssoon

How to get a CDL in Alabama

71 testing offices74 registered schoolsUpdated September 2026

Getting a commercial driver’s license in Alabama follows the federal steps in 49 CFR Parts 383, 380 and 391, run by the Alabama Law Enforcement Agency. This page lists those steps with their rules, then what Alabama has: where the test is given, the registered schools, and the state’s own fees.

The steps

  1. Get a DOT medical card. A commercial driver must pass a physical with a medical examiner listed on FMCSA’s National Registry (49 CFR 391.41, 391.43); the certificate lasts up to 24 months.
  2. Pass the knowledge test and get a commercial learner’s permit (CLP). The CLP lets you practise with a qualified CDL holder beside you and is valid for no more than a year (49 CFR 383.25).
  3. Hold the CLP for at least 14 days before taking the skills test (383.25(e)).
  4. Complete entry-level driver training with a provider on FMCSA’s Training Provider Registry, if this is your first Class A or B CDL, an upgrade, or a first passenger, school bus or HazMat endorsement (49 CFR 380.609). 74 registered providers have a training location in Alabama, 73 of them offering behind-the-wheel training.
  5. Take the skills test: vehicle inspection, basic control skills and an on-road test, in a vehicle of the class you want (49 CFR 383.113). Where it is given in Alabama is listed below.
  6. Age. Driving across state lines requires being at least 21 (49 CFR 391.11(b)(1)); a state may license drivers from 18 for driving inside the state only.

Where to take the CDL test in Alabama

71 offices and test sites in Alabama are on the official lists. The most are in Birmingham (2), Huntsville (2), Montgomery (2), Prattville (1), Bay Minette (1), Fairhope (1), Foley (1), Eufaula (1), Centreville (1), Oneonta (1). See all CDL testing and DMV offices in Alabama, with a map and search by city or ZIP.

CDL schools in Alabama

74 training providers registered with FMCSA list a location in Alabama. The most are in Birmingham (6), Montgomery (5), Bessemer (5), Mobile (4), Alexander City (3), Dothan (3), Huntsville (3), Anniston (2), Phenix City (2), Selma (2). See all CDL schools in Alabama.

What a CDL costs in Alabama

Commercial learner license$36.25
Skills test (by appointment only)$20
Class A license$66.25
Class B license$56.25
Class C license$36.25

Source: Document Requirements and Fees, Alabama Law Enforcement Agency. Checked September 24, 2026. Training, the medical exam and third-party testers’ charges are separate.

Adding HazMat

The hazardous materials endorsement needs a TSA security threat assessment with fingerprints (49 CFR 1572). 10 TSA enrollment centers in Alabama take HazMat applications. See the enrollment centers in Alabama.

Questions about getting a CDL in Alabama

How long does it take to get a CDL in Alabama?
At least 14 days: that is the minimum time between getting the CLP and taking the skills test (49 CFR 383.25(e)). Entry-level training and booking the test usually add several weeks.
Where can I take the CDL skills test in Alabama?
71 testing and licensing offices are listed in total.
How many CDL schools are there in Alabama?
74 providers on FMCSA’s Training Provider Registry list a location in Alabama.
How much does a CDL cost in Alabama?
The state fees are listed above, from the Alabama Law Enforcement Agency: commercial learner license $36.25; skills test (by appointment only) $20. Training costs are set by each school.